Bandit’s largest disc-style whole tree chipper, the Model 2400XP feature a 610 x 737 mm throat opening and Bandit’s powerful Slide Box Feed System to easily handle large, limby whole tree. The feed system is positioned close to the chipper opening for increased uniformity in the wood chips, and the system itself is synchronised to the feed rate of the whole tree chipper.

The Model 2400XP can fully load large wood chip trailers in as little as 25 minutes.

Preferred among paper pulp producers

  • Bandit’s largest disc-style whole tree chipper
  • Throat opening: 736.60 x 609.60 mm
  • Produces wood chips to serve paper and pulp production, and biomass

Chip production and quality

The Model 2400XP whole tree chipper is designed to produce an extremely uniform wood chip for pulp and paper markets, with the chips also suitable for particle board production, and as fuel for a range of biomass boilers. The 2400XP produces an extremely uniform wood chip ranging from 15.88 to 22.23 mm with a consistent thickness.

Innovative disc-chipper technology

Material meets the chipper disc at an approximate 45˚ angle so material is cut with the grain of the wood, similar to whittling. This provides an efficient cut, requiring less engine-power to chip larger material, reducing fuel consumption and reducing vibration.

Cupped paddles attached to the disc to capture wood chips and propel them out the discharge at tremendous velocity, providing enough force to fully load wood chip trailers.

An optional dirt separator is also available, which assists in removing a large portion of the loose bark, limbs, and dirt that shake loose during the chipping process.

Powerful feed system

The five-wheel system features two horizontal top feed wheels, one horizontal bottom feed wheel, and two vertical side wheels. Dual-angled top feed wheels creates more surface area to pull in and compress material as it enters the whole tree chipper, and maximum down pressure is placed on material, keeping it from slipping.

The side feed wheels and bottom feed wheel provide additional advantage for pulling in limby material. This feed system generates tremendous torque and pulling force.

Proven slide box system

The Bandit Model 2400XP is equipped with Bandit’s proven Slide Box Feed System that provides direct down pressure on material entering the whole tree chipper.

Bandit’s feed systems are legendary, providing exceptional crushing and compressing power to process wide crotches and limbs with virtually no trimming required.

The feed system is positioned close to the chipper opening for increased uniformity in the wood chips, and the system itself is synchronised to the feed rate of the whole tree chipper. Wood is never forced against the disc which can cause a braking action, nor is wood held back from the disc which can create fines.

The feed system design all but eliminates the spillage of wood chips adding as much as 5% to your wood chip yield while eliminating the need to clean up the spillage.

Maximum production – Superior throwing power

The Model 2400XP is an end-discharge whole tree chipper with a hydraulic swivel and deflector at the end of the discharge spout. It’s also equipped with a dirt separator for removing dirt and loose bark that becomes dislodged from the tree during chipping.

It maintains the aggressive chip throwing power for which Bandit chippers are known, easily loading the largest 15m wood chip trailers and throwing 32 ton loads in under 15 minutes.

Chipper Unit

Technical Data
Capacity609.60 mm
Opening736.60 x 609.60 mm

Chipper Drum/Disc

Drum/Disc Unit
TypeDISC
Diameter1 905 mm
Width127 mm
RPM± 600

Engine Options

Technical Data
TowableTrack
Engine
Power 522 – 597 kW /
700 – 800 HP
522 – 597 kW /
700 – 800 HP
Fuel Capacity757.08 litres1 287.04 litres
Hydraulic Capacity586.74 litres757.08 litres

In-Feed & Discharge

Feed System
TypeSlide Box Feed System
Diameter685.80 mm
Width711.20 mm
Discharge System
Hydraulic swivel discharge

Undercarriage

Towable Option
Axle Weight2x 11.34 tonne
Tyres8x 11R 22.5″ tyres
Track Option
BrandCAT
Model

Dimensions

Technical Data
TowableTrack
Length9.02 m7.32 m
Width3.51 m3.25 m
Height3.78 m3.51 m
Weight24.95 tonne33.57 tonne

Downloads

Photos

Videos